Wuhu ZONCN Automation Equipment Co., LTD.
Focus on producing VFD、Servo and various Motor Drivers Annual sales quantity 900,000+ units Power range：0.4kw~2000kw，Voltage range：110v~10000v Service distribution network covers the world
Add to Cart
380v 3 Phase VFD 7.5kw 11kw 15kw 18kw ZONCN Inverter Variable Frequency Drive 50hz 60hz
ZONCN Inverter SP600 Series variable frequency drive
Air compressor integrator
| Item | Inverter Specification | ||
| Basic control functions | Control mode | Open loop vector control, V / F control | |
| Maximum frequency | Open loop vector control:0～600Hz, V / F control: 0～3200Hz | ||
| Carrier frequency | 0.5kHz～15kHz , The carrier frequency is automatically adjusted based on the load features. | ||
| Input frequency resolution | Digital setting:0.01Hz Analog setting: maximum frequency x 0.025% | ||
| Startup torque | 0.5 Hz/150% | ||
| Speed range | 1:100 | ||
| Speed stability accuracy | ± 0.2%
| ||
| Torque control accuracy | ±10% | ||
| Overload capacity | 60s for 150% of the rated current, 3s for 180% of the rated current. | ||
| Torque boost | Fixed boost Customized boost 0.1%–30.0% | ||
| V/F curve
| Straight-line V/F curve Multi-point V/F curve N-power V/F curve (1.2-power, 1.4-power, 1.6-power, 1.8-power, square) | ||
| V/F separation | Two types: complete separation; half separation | ||
| Ramp mode
| Straight-line ramp S-curve ramp Four groups of acceleration/deceleration time with the range of 0.0–6500.0s | ||
| Communication methods | RS485 | ||
| JOG control
| JOG frequency range: 0.00Hz–50.00 Hz JOG acceleration/deceleration time: 0.0–6500.0s | ||
| Built-in PID | It realizes process-controlled closed loop control system easily. | ||
| Auto voltage regulation (AVR) | It can keep constant output voltage automatically when the mains voltage changes. | ||
| Frequency source | Digital setting | ||
| Input and output interfaces | Analog Input | 1 pressure sensor: 4 ~ 20mA input 2 temperature sensor: PT100 | |
| Digital input | 2 normal digital input 1 PTC protection circuit (compatible with normal digital inputs) | ||
| Digital Output | 2 relays output normally open (built in 220VAC voltage) | ||
| LED diode display | Standard 3 LED display | ||
| protection | Motor overheat protection (PTC), the power-to-ground short-circuit protection, inverter over-current, overload, over voltage, under voltage, overheat, output phase loss, communication fault, current detection fault, EEPROM read-write fault and so on. | ||
| Fan | DP500: Fan inverter: 380V 15-55kW Master Motor built-in fan inverter 380V 1.5kW; 380V 75-160kW Master motor built-in fan inverter 380V 2.2kW | ||
| Environment | Installation location | Indoor, free from direct sunlight, dust, corrosive gas,combustible gas, oil smoke, vapor, drip or salt. | |
| Altitude | Lower than 1000 m | ||
| Ambient temperature | -10°C ～+40°C (Downshift if the ambient temperature is between 40°C and 50°C) | ||
| Humidity | Less than 95%RH, without condensing | ||
| Vibration | Less than 5.9 m/s2 (0.6 g) | ||
| Storage temperature | -20°C～60°C | ||
Inverter outline dimension and install dimension
| Inverter Model | W | H | H1 | D | A | B | Ød |
| SP600T-5R5KY-4 | 118 | 238 | 274 | 154 | 80 | 260 | 5.5 |
| SP600T-7R5KY-4 | |||||||
| SP600T-011KY-4 | 145 | 293 | 335 | 172 | 100 | 320 | 7 |
| SP600T-015KY-4 | |||||||
| SP600T-018KY-4 | 168 | 338 | 380 | 172 | 100 | 365 | 7 |
| SP600T-022KY-4 | |||||||
| SP600T-030KY-4 | 217 | 400 | -- | 216 | 202 | 385 | 7 |
| SP600T-037KY-4 |
HMI outline dimension and install dimension
Wuhu ZONCN is one of the leading manufacturers in China specializing in the production of inverters and servo products. With 19 years of experience, we have established ourselves as a reliable and trusted brand in the inverter industry. Our company operates 4 factories with our headquarters located in Shanghai, covering a total factory area of over 100,000 square meters. With such extensive manufacturing capabilities, our annual inverter production capacity reaches approximately 900,000 units.
We offer a diverse range of inverter/VFDs (Variable Frequency Drives) that cater to various applications. Our main inverter series include NZ100, NZ200, Z2000, Z8000, T9000, and H5000 (IP65/54). These inverters have undergone rigorous quality control measures and have obtained ISO9001 certification. Additionally, all our VFD inverters are CE certified, ensuring their compliance with international standards.
Our VFD inverters are designed to operate within a voltage range of 110V to 1140V, with power options ranging from 0.4kW to 1000kW. This versatility allows our inverters to be widely used across industries such as textile, printing, CNC machines, food packaging, injection molding machines, fans, pumps, air compressors, water treatment systems, industrial washing machines, and many more.
ZONCN Development History
Q1. What is your inverter's MOQ?