Wuhu ZONCN Automation Equipment Co., LTD.
Focus on producing VFD、Servo and various Motor Drivers Annual sales quantity 900,000+ units Power range：0.4kw~2000kw，Voltage range：110v~10000v Service distribution network covers the world
Add to Cart
● Multi-function Control
● Position/Velocity/Torque Control
● Electronic Gear Function
● Speed/Torque Limit Function
● Home Search Function
● Zero-Speed Lock Function
● Smooth Speed Command Ramp Function
● Dynamic Brake and Energy Consumption Brake
● Multiple Fault Protection Functions
● Soft Reset Function
● Support EtherCAT Bus Communication Protocol
● Support Yaskawa M3 Bus Communication Protocol
CNC lathes: Outstanding product quality, exceptional accuracy, rapid speed, flawless surface finish, precise shaping of 3D surfaces, perpendicular angles and straight lines, chip-cutting capability.
Precision engraving machines: Superior resolution, exact positioning, matching of rotational momentum, high overload capacity.
Engraving and milling machines: Stable speed performance, remarkable precision, quick response frequency, extensive speed range, low-speed high torque.
Engraving machines: Swift speed response, excellent product smoothness, minimal patterns, seamless curve cutting.
Drilling and tapping machines: High-speed and low-speed machining with exceptional precision, wide adjustment range, adaptable to diverse product requirements.
Machining centers: Abundant parameter settings, combined with fine-tuning frequency division coefficients, inertia friction compensation, gain filter, and other parameters to accomplish various intricate machining tasks.
|
Input power | Control Circuit Power | 1PHAC200V~AC240V 50/60Hz | |||
| Main Circuit Power | US880 | US810 | |||
|
3PH220V:0.2KW~5.5KW 3PH380V:1.5KW~15KW | 1PH220V:0.2KW～1.0KW 3PH220V:1.5KW~2.0KW 3PH380V:2.0KW～15KW | ||||
|
Environment Condition | Temperature | Environment temperature 0°C～55°C( without condensing) Storage temperature -20°C～65°C(Maximum temperature 87°C 72 hours) | |||
| Humidity | Both using and storage need to keep below 90%RH(without condensing) | ||||
| Altitude | Lower than 1000m | ||||
| Vibration | Less than 5.88m/S²,10-60Hz(Can not continuous use under resonance frequency) | ||||
| Control mode | IGBT PWM type sine wave drive | ||||
|
Encoder feedback | 24Bit(16777216)Absolute encoder 23Bit(8388608)Absolute encoder 17Bit(131072)Absolute encoder | ||||
| Communication | EtherCAT,M3 | Industrial Ethernet bus(COE) | |||
|
Operation panel | 1.4 keys 2.LED light 5 bits 3.CPU workable light 4.Vector signal monitor output | ||||
| Brake resistor | Built-in regenerative resistor (Can be external) | ||||
| Dynamic brake | Built in | ||||
|
Position control | Signal input | US880 series support EtherCAT.M3 US810 series support EtherCAT. Pulse signal input | |||
| Resistance to vibration | Can be used | ||||
|
Speed control | Signal input | US880 series support EtherCAT.M3 US810 series support EtherCAT. External speed input | |||
| Zero speed dead zone | According to zero speed dead zone input | ||||
| Instantaneous velocity observer | Can be used | ||||
| Speed command filter | Can be used | ||||
| Torque control | Signal input | US880 series support EtherCAT.M3 US810 series support EtherCAT. External torque input | |||
|
Common use | Protection | Hardware error | Over voltage, under voltage, over speed, overload, over heat, over current,encoder fault | ||
| Software error | Position deviation too large, command pulse frequency division, EEROM fault | ||||
| Alarm data track | Refer to alarm data list | ||||
ZONCN was established in 2006 and is located in Maogang Town, Songjiang District, Shanghai. In August 2023, the company was listed on the main board of the Shanghai Stock Exchange (stock code: 603275). We are a high-tech enterprise specializing in the research, development, manufacturing, and sales of servo drives and servo motors. With a factory area of 27,000 square meters, it is one of the largest servo system manufacturers currently. Since the establishment, our company continuously engaged in technological innovation. Now we have a complete range of products, including pulse-type servos, EtherCAT bus servos, M3 bus servos, servo spindles, and other industry-specific machines. The products are known for comprehensive features, strong functionality, and stable performance,and we are now a leading enterprise both domestically and internationally. Our products are widely used in various fields such as electronic processing equipment, CNC machine tools, embroidery and textile, laser processing, packaging and printing, engraving machines, winding machines, industrial robots, medical equipment, and logistics industry.
1,What is your MOQ?
1 PC.
2,What is terms of payment?
T/T 100% before delivery.
3,What is your delivery time?
Fast delivery is our advantage. Usually within ten days.
4,How can we do OEM/ODM?
We do OEM for more than 40 brands. If your order reaches a certain quantity, we can do it for you.