Wuhu ZONCN Automation Equipment Co., LTD.
Focus on producing VFD、Servo and various Motor Drivers Annual sales quantity 900,000+ units Power range：0.4kw~2000kw，Voltage range：110v~10000v Service distribution network covers the world
Add to Cart
1:High performance: Z2000 series adopts advanced control algorithm and high performance hardware design, with fast and accurate response ability and accurate control accuracy. Whether running at high speed or low speed, the Z2000 series can control the speed of the motor stably and reliably, meeting the needs of industrial production for precise control.
2:High efficiency and energy saving: Z2000 series inverter adopts advanced PWM modulation technology and energy feedback technology, which can effectively reduce the energy consumption of the motor. By adjusting the speed of the motor according to the load demand, the Z2000 series can avoid the electric length of the high load state, reduce energy consumption, and achieve energy saving effect.
3:Versatility: The Z2000 series inverter has rich functions and flexible parameter Settings to adapt to different application requirements. It supports a variety of control modes, such as vector control, V/F control and vector control, which can meet the control requirements in different industrial scenarios. In addition, the Z2000 series also has a variety of protection functions, such as overload protection, short circuit protection and overtemperature protection, to ensure the safe and reliable operation of the equipment.
4:Stable and reliable: Z2000 series inverter adopts high quality components and strict production process, after strict quality control and testing, to ensure the stability and reliability of products. It has good anti-interference ability and adaptability, can operate stably in harsh working environments, and provide users with a durable and reliable experience.
| Item | Z2000 series |
| Control Mode | Sensorless flux vector control(SFVC) Voltage/Frequency (V/F) Control |
| Maximum frequency | Vector control:0-320Hz V/F control:0-3200Hz |
| Carrier frequency | 1kHz~16kHz The carrier frequency is automatically adjusted based on the load features. |
| Input frequency resolution | Digital setting:0.01Hz Analog setting: Maximum frequency 0.025% |
| Start torque | G: Type:0.5Hz/150%(SVC) P: Type:0.5Hz/100% |
| Speed range | 1:100(SVC) |
| Speed stability accuracy | ±0.5%(SVC) |
| Overload capacity | G Type:60s for 150% of the rated current, 3s for 180% of the rated current. P Type:60s for 120% of the rated current, 3s for 150% of the rated current. |
| Torque boost | Auto-boost ; Customized boost:0.1%~30.0% |
| VF curve | Line V/F curve；Multi-point V/F curve；N-power V/F curve |
| VF separation | 2 types: complete separation；half separation |
| Ramp Mode | Straight-line ramp；S-curve ramp；Four groups of acceleration/deceleration time:0~6500.0s |
| Auto voltage regulation(AVR) | It can keep constant output voltage automatically when the mains voltage changes |
| Rapid current limit | It helps to avoid frequent over current faults of the AC drive. |
| Torque limit and control | It can keep constant output voltage automatically when the mains voltage changes |
| Onboard PID | It realizes process-controlled closed loop control system easily |
| JOG control | JOG frequency range: 0.00–50.00 Hz JOG acceleration/deceleration time: 0.0–6500.0s |
| DC braking | DC braking frequency:0.00Hz to maximum frequency Braking time:0.0-100.0s Braking action current value:0.0%-100.0% |
| Instantaneous blackout doesn’t stop | The load feedback energy compensates the voltage reduction so that the AC drive can continue to run for a short time. |
| Timing control | Timing range:0.0Min~6500.0Min |
| Communication | RS485 / Ethecat(optional) |
| Run command channel | Given by the panel,control terminals,serial communication port,can be switched by many ways |
| Frequency source | 10 kinds of frequency source, given by digital analog voltage, analog current, pulse, serial port. It can be switched by many ways |
| Auxiliary frequency source | 10 kinds of frequency source, can easily realize micro adjustment, frequency Synthesizer |
| Input terminals | 6 digital input terminals, one of which supports up to100 kHz high-speed pulse input (optional). 2 analog input terminal, one of which only supports0-10 V voltage input and the other supports 0-10V voltage input or 4-20 mA current input. |
| Output terminals | 1 digital output terminal 1 relay output terminal 1 analog output terminal: that supports 0-20 mA current output or 0-10v voltage output |
| Multiple protection modes | Motor short-circuit detection at power-on, output phase loss protection, over-current protection, over-voltage protection, under voltage protection, overheat protection and overload protection. |
| Close loop vector control | No |
| Built-in braking unit | Yes,below 37kw (include 37kw). Optional for more than 45KW |
| VF+Vector control | Yes |
| High speed pulse output | Yes |
| Movable digital keypad | Yes |
| AI | 2 |
| AO | 1 |
| DI | 6 |
| DO | Standard 1,optional 2 |
| Relay output | Standard 1,over 30kw optional 2 |
| DC braking | Yes |
| Collector | 1 |
| 24V power supply | Below 30kw optional,30kw and above support |
| EMC filter | Optional |
| 0.1S acceleration/deceleration | Yes |
| Simple PLC | Yes |
| All kinds of protection | Support |
| PID | Yes |
| DC choke | 30kw—220kw optional,250kw and above all have |
| DC bus +,- terminals | Yes |
| STO function | No |
| Communication | RS485 |
| Certificate | KC+CE |
| Warranty | 18 months |
Q1:What is your MOQ?
A: 1 pc
Q2:What's your terms of payment?
A:T/T 100% before delivery.
Q3:What's your delivery time?
A:Generally within 15 days after receiving full payment.
Q4:How can l get OEM/ODM order?
A:If your order quantity meets certain requirements, we are happy to customize it for you. We have cooperation with more than forty manufacturers.