ITEM		Z5000 Series Inverter
Standard functions	Control mode	Sensorless flux vector control (SFVC)
	Control mode	Voltage/Frequency (V/F) control
	Maximum frequency	Vector control: 0–320 Hz
	Maximum frequency	V/F control: 0–3200Hz
	Carrier frequency	1 kHz–16 kHz
	Carrier frequency	The carrier frequency can be automatically adjusted based on the load features.
	Input frequency resolution	Digital setting: 0.01 Hz
	Input frequency resolution	Analog setting: maximum frequency x 0.025%
	Startup torque	G type: 0.5 Hz/150% (SFVC);
	Startup torque	P type: 0.5 Hz/100%
	Speed range	1:100 (SFVC)
	Speed stability accuracy	± 0.5% (SFVC)
	Overload capacity	G type: 60s for 150% of the rated current, 3s for 180% of the rated current.
	Overload capacity	P type: 60s for 120% of the rated current, 3s for 150% of the rated current
	Torque boost	Fixed boost
	Torque boost	Customized boost 0.1%–30.0%
	V/F curve	Straight-line V/F curve
		Multi-point V/F curve
		N-power V/F curve (1.2-power, 1.4-power, 1.6-power, 1.8-power, square)
	V/F separation	Two types: complete separation; half separation
	Ramp mode	Straight-line ramp
		S-curve ramp
		Four groups of acceleration/deceleration time with the range of 0.0–6500.0s
	DC braking	DC braking frequency: 0.00 Hz to maximum frequency； Braking time: 0.0-36.0s；
	DC braking	Braking action current value: 0.0%–100.0%
	JOG control	JOG frequency range: 0.00–50.00 Hz
	JOG control	JOG acceleration/deceleration time: 0.0–6500.0s
	Onboard Multiple preset speeds	It implements up to 16 speeds via the simple PLC function or by input(X) terminal states
	Onboard PID	It realizes process-controlled closed loop control system easily.
	Auto voltage	It can keep constant output voltage automatically when the mains voltage changes.
	regulation (AVR)
	Over-voltage/	The current and voltage are limited automatically during the running process so as to avoid frequent tripping due to over-voltage/over-current.
	Over-current stall
	control
	Torque limit and torque control	It can limit the torque automatically and prevent frequent over-current tripping during the running process.
	Instantaneous stop doesn’t stop	The load feedback energy compensates the voltage reduction so that the AC drive can continue to run for a short time.
	Rapid current limit	It helps to avoid frequent over-current faults of the AC drive.
	High performance	Control of asynchronous motor is implemented through the high-performance current vector control technology.
	Timing control	Time range: 0.0–6500.0 minutes
	Communication methods	RS485
	Running command channel	Given by the panel, control terminals,
	Running command channel	Serial communication port, can be switched by many ways
	Frequency source	10 kinds of frequency source, given by
	Frequency source	Digital analog voltage, analog current, Pulse, serial port. can be switched by many ways
	Auxiliary frequency source	10 kinds of Frequency source, given by Digital analog voltage, analog current, pulse, serial port. Can be switched by many ways.
Input and output	Input terminals	6 digital input terminals, one of which supports up to 100 kHz high-speed pulse input.(S3)
	Input terminals	2 analog input terminal,one of which only supports 0-10V voltage input and the other supports 0–10 V voltage input and 4–20 mA current input.
	Output terminal	1 digital output terminal
		1 relay output terminal (RA.RB.RC)
		1 analog output terminal :that supports 0–20 mA current output or 0–10 V voltage output
	Frequency source	Digital setting, analog voltage setting, analog current setting, pulse setting and serial communication port setting.
	LED display	It displays the parameters.
	Key locking and function selection	It can lock the keys partially or completely and define the function range of some keys so as to prevent malfunction.
	Protection mode	Motor short-circuit detection at power-on, output phase loss protection, over-current protection, over-voltage protection, under voltage protection, overheat protection and overload protection.

VFD Specification

VFD Model	Input voltage	Rated Output Power (KW)	Rated Input current (A)	Rated Output Current (A)	Motor Power (kW)
Z5200A00D7K-BF	1PH AC220V ±15%	0.75	7.2	5	0.75
Z5200A01D5K-BF		1.5	10	7	1.5
Z5200A02D2K-BF		2.2	16	11	2.2
Z5400A0D75K-BF	3PH AC380V ±15%	0.75	3.8	2.5	0.75
Z5400A1D5K-BF		1.5	5	3.7	1.5
Z5400A02D2K-BF		2.2	5.8	5	2.2
Z5400A03D7K-BF		3.7	10	9	3.7
Z5400A05D5K-BF		5.5	15	13	5.5
Z5400A07D5K-BF		7.5	20	17	7.5
Z5400A0011K-BF		11	26	25	11
Z5400A0015K-BF		15	35	32	15
Z5400A0018K-BF		18.5	38	37	18.5
Z5400A0022K-BF		22	46	45	22
Z5400A0030K-BF		30	62	60	30
Z5400A0037K-BF		37	76	75	37
…		…	…	…	…
Z5400A00160K-BF		160			160

Inverter Application

FAQ

1. What Z5200 and Z5400 stands for?

A. Z5200 stands for Z5000 series 220v single phase input inverter, Z5400 stands for Z5000 seris 400V three phase input inverter

2. Does this series OF inverter have analog input terminals?

A. Yes, FIC terminals can be used to select analog voltage input(0-10v) and analog current input (4-20mA) through the switch SW1.

3. This series of inverter is Dust-proof, water-proof?

A. Yes, Z5000 inverter is high protection inverter, it can be used in bad enviroment, eg. damp, dirty, etc.

4. What is your warranty time for this inverter?

A. 18 months

5. Can i buy 1unit to test first?

A. No problem, our MOQ is 1 unit.

Inquiry Cart 0