Wuhu ZONCN Automation Equipment Co., LTD.
Focus on producing VFD、Servo and various Motor Drivers Annual sales quantity 900,000+ units Power range：0.4kw~2000kw，Voltage range：110v~10000v Service distribution network covers the world
Add to Cart
Product Brief Introduction:
The open-loop vector control technology used by the NZ200 vfd inverter provides more precise regulation of the motor. Compared with the traditional VF control, the open-loop vector control can control the torque and speed of the motor more accurately, and achieve more efficient energy utilization.
The NZ200 vfd inverter specifically supports permanent magnet synchronous motors, a feature that is particularly prominent in the field of air compressors. Permanent magnet synchronous motor has been widely used in the field of air compressor because of its high efficiency, energy saving and low noise. The perfect combination of NZ200 vfd inverter and permanent magnet synchronous motor brings more stable operation and lower maintenance costs for air compressors. In practical applications, after many enterprises use NZ200 vfd inverter, the failure rate of air compressor is significantly reduced, and the operating efficiency is significantly improved.
The NZ200 vfd inverter is also very well protected. It has overload protection, overheat protection, undervoltage protection, overvoltage protection and other protection functions, can protect the inverter and the motor from damage in a variety of emergency situations. According to the relevant test report, the NZ200 vfd inverter can operate stably under various extreme conditions, ensuring the continuity and safety of the production line.
| Item | ZONCN NZ200 Series | |
| Control Mode | Sensorless flux vector control(SFVC) Voltage/Frequency (V/F) Control | |
| Maximum frequency | Vector control:0-320Hz V/F control:0-3200Hz | |
| Carrier frequency | 1kHz~16kHz The carrier frequency is automatically adjusted based on the load features. | |
| Input frequency resolution | Digital setting:0.01Hz Analog setting: Maximum frequency 0.025% | |
| Start torque | G: Type:0.5Hz/150%(SVC) P: Type:0.5Hz/100% | |
| Speed range | 1:100(SVC) | |
| Speed stability accuracy | ±0.5%(SVC) | |
| Overload capacity | G Type:60s for 150% of the rated current, 3s for 180% of the rated current. P Type:60s for 120% of the rated current, 3s for 150% of the rated current. | |
| Torque boost | Auto-boost ; Customized boost:0.1%~30.0% | |
| VF curve | Straight-line VF curve; Multi-point VF curve; N-power VF curve(1.2-power,1.4-power,1.6-power,1.8-power, 2-power) | |
| VF separation | 2 types: complete separation；half separation | |
| Ramp Mode | Straight-line ramp；S-curve ramp；Four groups of acceleration/deceleration time:0~6500.0s | |
| Simple PLC, Multiple preset speeds | It implements up to 16 speeds via the simple PLC function or combination of terminal states | |
| Auto voltage regulation(AVR) | It can keep constant output voltage automatically when the mains voltage changes | |
| Rapid current limit | It helps to avoid frequent over current faults of the AC drive. | |
| Torque limit and control | It can limit the torque automatically and prevent frequent over-current tripping during the running process. | |
| Onboard PID | It realizes process-controlled closed loop control system easily | |
| Rapid current limit | It helps to avoid frequent over current faults of the AC drive. | |
| JOG control | JOG frequency range: 0.00–50.00 Hz JOG acceleration/deceleration time: 0.0–6500.0s | |
| DC braking | DC braking frequency:0.00Hz to maximum frequency Braking time:0.0-100.0s Braking action current value:0.0%-100.0% | |
| Instantaneous blackout doesn’t stop | The load feedback energy compensates the voltage reduction so that the AC drive can continue to run for a short time. | |
| Timing control | Timing range:0.0Min~6500.0Min | |
| Communication | RS485 | |
| Run instruction channel | Keyboard given, control terminal given, serial communication port given. It can be switched in a variety of ways. | |
| Frequency source | 10 kinds: digital given, analog voltage given, analog current given, pulse given, serial port given. It can be switched in a variety of ways. | |
| Auxiliary frequency source | 10 auxiliary frequency sources. It can flexibly realize auxiliary frequency fine-tuning and frequency synthesis. | |
| Input terminals | 6 digital input terminals, one of which supports up to 100 kHz high-speed pulse input (S3 optional). 2 analog input terminal, one of which only supports 0-10v voltage input(FIV) and the other supports 0-10 voltage input or 4-20 mA current input(FIC). | |
| Output terminals | 1 digital output terminal(MO1) 1 relay output terminal(RA,RB,RC) 1 analog output terminal :that supports 0-20 mA current output or 0-10v voltage output(FOV) | |
| Remark | X terminal is NPN type by default. If PNP type is required, contact customer service for customization. | |
| LED display | Not removable. More than 45kw is acceptable. | |
| Keystroke locking and function selection | Realize partial or full lock of keys, and define the scope of action of some keys to prevent false touch | |
| Multiple protection modes | Motor short-circuit detection at power-on, output phase loss protection, over-current protection, over-voltage protection, under voltage protection, overheat protection and overload protection. | |
| Model | Rated output power (kW) | Rated input current (A) | Rated output current (A) | Motor Power (kW) |
| Input voltage(v):1PH AC 220V±15% | ||||
| NZ200-0R4G-2 | 0.4 | 5.4 | 2.5 | 0.4 |
| NZ200-0R75G-2 | 0.75 | 7.2 | 5 | 0.75 |
| NZ200-1R5G-2 | 1.5 | 10 | 7 | 1.5 |
| NZ200-2R2G-2 | 2.2 | 16 | 11 | 2.2 |
| NZ200-3R7G-2 | 3.7 | 17 | 16.5 | 3.7 |
| Input voltage(v):3PH AC 380V±15% | ||||
| NZ200-0R4G-4 | 0.4 | 3.4 | 1.2 | 0.4 |
| NZ200-0R75G-4 | 0.75 | 3.8 | 2.5 | 0.75 |
| NZ200-1R5G-4 | 1.5 | 5 | 3.7 | 1.5 |
| NZ200-2R2G-4 | 2.2 | 5.8 | 5 | 2.2 |
| NZ200-3R7G/5R5P-4 | 3.7 | 10.7 | 9 | 3.7 |
| NZ200-5R5G/7R5P-4 | 5.5 | 14.6 | 13 | 5.5 |
| NZ200-7R5G/11P-4 | 7.5 | 20 | 17 | 7.5 |
| NZ200-11G/15P-4 | 11 | 26 | 25 | 11 |
| NZ200-15G/18.5P-4 | 15 | 35 | 32 | 15 |
| NZ200-18.5G/22P-4 | 18.5 | 38 | 37 | 18.5 |
| NZ200-22G/30P-4 | 22 | 46 | 45 | 22 |
| NZ200-30G/37P-4 | 30 | 62 | 60 | 30 |
| NZ200-37G/45P-4 | 37 | 76 | 75 | 37 |
| NZ200-45G/55P-4 | 45 | 92 | 90 | 45 |
| NZ200-55G/75P-4 | 55 | 113 | 110 | 55 |
| NZ200-75G/90P-4 | 75 | 157 | 150 | 75 |
| NZ200-90G/110P-4 | 90 | 180 | 176 | 90 |
The ZONCN NZ200 inverter is widely utilized in common industrial sectors such as compressors, packaging machines, engraving machines, textile machinery, and conveyor belts. Its versatility and reliability make it an ideal choice for these applications. The NZ200 inverter provides precise control and efficient operation, ensuring optimal performance in various industrial processes. With its advanced technology and user-friendly interface, the NZ200 inverter offers seamless integration and ease of operation. Its compact design and robust construction make it suitable for installation in different industrial environments. Whether it's controlling the speed of a compressor, regulating the packaging process, or powering an engraving machine, the NZ200 inverter delivers exceptional performance and enhances productivity in these industrial fields.
1:What is your MOQ?
1 PC.
2:What is terms of payment?
T/T 100% before delivery.
3:What is your delivery time?
Fast delivery is our advantage. Usually within ten days.
4:How can we do OEM/ODM?
We do OEM for more than 40 brands. If your order reaches a certain quantity, we can do it for you.